Intermec CN70
-
Size: 6.66in L x 3.14in W x 1.35in D
-
Weight: 16.6oz
-
Display: Transmissive VGA touch, 3.5in LED backlight
-
Expansion Slots: microSD, up to 32GB
-
Bluetooth: Yes
-
Cellular: Yes
-
OS: Windows Embedded 6.5.3
-
Memory: 512MB RAM/1GB Flash
-
Processor: TI OMAP3 1GHz
-
TI OMP3 600 MHz
-
WiFi: 802.11a/b/g/n
How To
Connect to Computer
For the Intermec CN70E, you have to turn on the PxClient before it will be recognized by Windows Mobile Device Center.
Warm Boot
-
Press the Power button.
-
Select Reboot from the menu.
Cold Boot
WARNING
Cold booting any device can erase data and the TrackAbout software. Contact TrackAbout Support before attempting a cold boot.
-
Press the Power button to suspend the handheld.
-
Remove the handstrap and the battery pack.
-
Press the Reset button in the battery compartment.
-
Press power and wait until the handheld reboots.
Clean Boot
WARNING
Cold booting any device can erase data and the TrackAbout software. Contact TrackAbout Support before attempting a cold boot.
-
Remove the battery pack from the back of the handheld.
-
With a stylus, press the Reset button in the battery cavity.
-
Insert the battery back into the handheld and immediately press and hold the Power button and the Volume Down button.
-
Continue to hold the Power button and the Volume Down button until you are prompted to release them.
-
Press the Volume Up button to start the clean boot.
-
Wait for the handheld to load files from its ROM.
Environmental Specs:
Rain and Dust Resistance: IP67
Drop Specification:
-
8ft (2.4m) to concrete per MIL-STD 810G
-
2000 (1m) tumbles per IEC 60068-2-32 specification
Electrostatic Discharge:
-
+/- 15 kV air discharge
-
+/- 8 kV direct discharge
